{"product_id":"audio-technica-at-lp70xbt-fully-automatic-wireless-belt-drive-turntable","title":"Audio-Technica AT-LP70XBT Fully Automatic Wireless Belt-Drive Turntable","description":"\u003ch1\u003eAudio-Technica AT-LP70XBT Fully Automatic Wireless Belt-Drive Turntable at Vinyl Sound Toronto Canada\u003c\/h1\u003e\n\n\u003cp\u003eThe AT-LP70XBT is a fully automatic belt-drive turntable with Bluetooth wireless output from Audio-Technica (Tokyo, Japan), available at Vinyl Sound in Toronto, Canada. Building on the wired AT-LP70X platform, the AT-LP70XBT adds \u003cstrong\u003eBluetooth 5.2 with Qualcomm aptX Adaptive codec support\u003c\/strong\u003e, the most advanced aptX standard available, for wireless streaming to compatible speakers and headphones at higher quality than aptX or SBC alone. The integrated \u003cstrong\u003eAT-VM95C Dual Moving Magnet cartridge\u003c\/strong\u003e outputs 4.0 mV and accepts the full VM95 Series stylus range for long-term upgrade flexibility, while the three-piece anti-resonance chassis achieves a \u003cstrong\u003esignal-to-noise ratio greater than 55 dB\u003c\/strong\u003e. A built-in switchable phono preamplifier provides 252 mV line-level output for wired connection to any powered speaker or amplifier. Available in Black\/Silver, Black\/Bronze, and White\/Silver.\u003c\/p\u003e\n\n\u003ch2\u003eaptX Adaptive Bluetooth 5.2 and Wired Output\u003c\/h2\u003e\n\u003cp\u003eThe AT-LP70XBT's Bluetooth 5.2 implementation supports three codecs in descending quality order: Qualcomm aptX Adaptive, Qualcomm aptX, and SBC. aptX Adaptive is the most capable of the three, offering variable bitrate transmission up to 24-bit\/48 kHz, lower latency than standard aptX, and improved performance in congested RF environments. The turntable negotiates the highest mutually supported codec automatically when pairing with a connected device, meaning listeners with aptX Adaptive receivers or headphones get the best available wireless quality without any manual configuration. Bluetooth 5.2 operates via the A2DP profile across the 2.402 GHz to 2.480 GHz band using GFSK\/Pi4DQPSK\/8DPSK modulation with FHSS spread spectrum, up to approximately 10 metres line-of-sight at 2.5 mW EIRP. For wired use, the detachable dual RCA cable with ground connects to any amplifier or powered speaker, with the internal switchable preamplifier delivering either 4.0 mV phono or 252 mV line-level output.\u003c\/p\u003e\n\n\u003ch2\u003eAT-VM95C Cartridge, J-Tonearm, and Three-Piece Chassis\u003c\/h2\u003e\n\u003cp\u003eThe AT-VM95C Dual Moving Magnet cartridge is permanently integrated into the AT-LP70XBT's J-shaped tonearm headshell and cannot be removed, but its stylus assembly is fully user-replaceable without tools. The standard AT-VMN95C conical stylus delivers excellent channel separation and low distortion at 4.0 mV nominal output. The VM95 Series upgrade path extends through the AT-VMN95E elliptical, AT-VMN95EX, AT-VMN95ML micro-linear, and AT-VMN95SH Shibata, each offering progressively finer groove-wall contact for improved detail retrieval and reduced record wear. The J-shaped tonearm maintains a tracking error angle below 2.0 degrees across the record surface with a 220 mm effective arm length and 18 mm overhang. A tonearm lock protects the stylus during transport, and a three-piece chassis construction isolates motor and platter vibration from the tonearm base and signal path, producing a measurably lower noise floor than the single-piece AT-LP60X platform.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBluetooth 5.2 with aptX Adaptive:\u003c\/strong\u003e Supports Qualcomm aptX Adaptive, aptX, and SBC codecs via A2DP profile; automatically negotiates the highest quality codec supported by the connected device.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWired Dual RCA Output:\u003c\/strong\u003e Detachable dual RCA male to dual RCA male cable with grounding wire for traditional wired connection to any amplifier or powered speaker.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAT-VM95C Integral Dual Moving Magnet Cartridge:\u003c\/strong\u003e Factory-installed with AT-VMN95C 0.6 mil conical stylus outputting 4.0 mV nominal; cartridge body is fixed, stylus is user-replaceable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull VM95 Series Stylus Compatibility:\u003c\/strong\u003e Accepts AT-VMN95E elliptical, AT-VMN95EX, AT-VMN95ML micro-linear, and AT-VMN95SH Shibata stylus upgrades for a broad long-term upgrade path.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJ-Shaped Tonearm with Low Tracking Error:\u003c\/strong\u003e 220 mm effective arm length, 18 mm overhang, and less than 2.0 degrees of tracking error angle across the record surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-Piece Anti-Resonance Chassis:\u003c\/strong\u003e Isolated chassis construction dampens structural resonance for improved sound quality compared to the AT-LP60X single-piece platform.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGreater Than 55 dB Signal-to-Noise Ratio:\u003c\/strong\u003e Quieter background than the AT-LP60X series for improved dynamic contrast during playback.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully Automatic Operation with Tonearm Lift:\u003c\/strong\u003e Start and stop buttons handle automatic tonearm placement and return; manual tonearm lift lever allows individual track cueing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTonearm Lock:\u003c\/strong\u003e Secures the tonearm for transport and storage to protect the stylus.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-In Switchable Phono Preamplifier:\u003c\/strong\u003e Selectable phono output (4.0 mV) or line output (252 mV, RIAA equalized, 36 dB gain).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAnti-Resonance Die-Cast Aluminum Platter with Felt Mat:\u003c\/strong\u003e Stable, low-vibration playing surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExternal AC Adapter:\u003c\/strong\u003e AC\/DC conversion outside the chassis isolates the power stage from the signal chain.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree Colour Options:\u003c\/strong\u003e Available in Black\/Silver, Black\/Bronze, and White\/Silver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrive Method\u003c\/td\u003e\n      \u003ctd\u003eBelt-drive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperation\u003c\/td\u003e\n      \u003ctd\u003eFully automatic\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMotor\u003c\/td\u003e\n      \u003ctd\u003eDC motor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSpeeds\u003c\/td\u003e\n      \u003ctd\u003e33-1\/3 RPM, 45 RPM\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTurntable Platter\u003c\/td\u003e\n      \u003ctd\u003eDie-cast aluminum with felt mat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCartridge\u003c\/td\u003e\n      \u003ctd\u003eAT-VM95C Dual Moving Magnet (integrated, non-removable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eStylus\u003c\/td\u003e\n      \u003ctd\u003eAT-VMN95C, 0.6 mil conical (replaceable; compatible with full VM95 Series)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutput Level (Phono)\u003c\/td\u003e\n      \u003ctd\u003e4.0 mV nominal at 1 kHz, 5 cm\/sec\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOutput Level (Line)\u003c\/td\u003e\n      \u003ctd\u003e252 mV nominal at 1 kHz, 5 cm\/sec\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePhono Pre-Amp Gain\u003c\/td\u003e\n      \u003ctd\u003e36 dB nominal, RIAA equalized\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWow and Flutter\u003c\/td\u003e\n      \u003ctd\u003eLess than 0.25% (WTD)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSignal-to-Noise Ratio\u003c\/td\u003e\n      \u003ctd\u003eGreater than 55 dB (DIN-B)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEffective Arm Length\u003c\/td\u003e\n      \u003ctd\u003e220 mm (8.7\")\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOverhang\u003c\/td\u003e\n      \u003ctd\u003e18 mm (0.71\")\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTracking Error Angle\u003c\/td\u003e\n      \u003ctd\u003eLess than 2.0 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBluetooth Version\u003c\/td\u003e\n      \u003ctd\u003e5.2\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Bluetooth Profile\u003c\/td\u003e\n      \u003ctd\u003eA2DP\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSupported Codecs\u003c\/td\u003e\n      \u003ctd\u003eQualcomm aptX Adaptive, Qualcomm aptX, SBC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum Communication Range\u003c\/td\u003e\n      \u003ctd\u003eApprox. 10 m (33') line of sight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFrequency Band\u003c\/td\u003e\n      \u003ctd\u003e2.402 GHz to 2.480 GHz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eModulation Method\u003c\/td\u003e\n      \u003ctd\u003eGFSK, Pi\/4DQPSK, 8DPSK\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaximum RF Output\u003c\/td\u003e\n      \u003ctd\u003e2.5 mW EIRP\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Consumption\u003c\/td\u003e\n      \u003ctd\u003e1.6 W\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAC Adapter\u003c\/td\u003e\n      \u003ctd\u003eInput: 100 to 240V AC, 50\/60 Hz, 0.4A max. Output: 12V DC, 0.5A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n      \u003ctd\u003e400 mm x 330 mm x 110 mm (16\" x 13\" x 4.3\")\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003eApprox. 2.9 kg (6.4 lbs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eColour Options\u003c\/td\u003e\n      \u003ctd\u003eBlack\/Silver, Black\/Bronze, White\/Silver\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eReplacement Stylus\u003c\/td\u003e\n      \u003ctd\u003eAT-VMN95C (sold separately); full VM95 Series compatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccessories Included\u003c\/td\u003e\n      \u003ctd\u003eDust cover, felt mat, platter (with drive belt), dust cover hinges, 45 RPM adapter, RCA audio cable (approx. 1.0 m, dual RCA male to dual RCA male with ground), AC adapter (approx. 1.5 m)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eConnections at a Glance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBluetooth 5.2 wireless output (A2DP, aptX Adaptive \/ aptX \/ SBC)\u003c\/li\u003e\n  \u003cli\u003eDual RCA stereo output with ground (detachable dual RCA male to dual RCA male cable)\u003c\/li\u003e\n  \u003cli\u003eSwitchable phono\/line output via internal preamplifier\u003c\/li\u003e\n  \u003cli\u003eAC power input via external 12V DC adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the Audio-Technica AT-LP70XBT?\u003c\/h3\u003e\n\u003cp\u003eThe Audio-Technica AT-LP70XBT is a fully automatic belt-drive turntable with Bluetooth 5.2 wireless output, an integrated AT-VM95C Dual Moving Magnet cartridge, and a built-in switchable phono preamplifier. It plays 33-1\/3 and 45 RPM records, supports Qualcomm aptX Adaptive, aptX, and SBC Bluetooth codecs, and achieves a signal-to-noise ratio greater than 55 dB from its three-piece anti-resonance chassis. The AT-LP70XBT is the Bluetooth-equipped variant of the wired AT-LP70X and shares the same tonearm, cartridge, chassis, and preamplifier platform.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the AT-LP70XBT compare to the AT-LP60XBT or the Pro-Ject Primary E BT?\u003c\/h3\u003e\n\u003cp\u003eThe AT-LP70XBT improves on the AT-LP60XBT in three measurable ways: the AT-VM95C cartridge delivers a higher output (4.0 mV versus 2.5 mV) with better channel separation; the signal-to-noise ratio improves from greater than 50 dB to greater than 55 dB; and Bluetooth 5.2 with aptX Adaptive replaces the AT-LP60XBT's older CSR chipset supporting only aptX and SBC. The Pro-Ject Primary E BT is a manual turntable without a built-in phono stage, requiring a separate preamplifier and amplifier; its tonearm offers higher resolution but demands setup steps the AT-LP70XBT eliminates entirely. The AT-LP70XBT is the stronger choice for listeners who want improved performance over the AT-LP60XBT with the same fully automatic, plug-and-play experience.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is aptX Adaptive and how does it improve wireless audio from vinyl?\u003c\/h3\u003e\n\u003cp\u003eaptX Adaptive is Qualcomm's most advanced Bluetooth audio codec, using a variable bitrate up to 24-bit\/48 kHz resolution with lower latency and better performance in congested wireless environments compared to standard aptX or SBC. On a vinyl source, where the analogue signal contains a wide dynamic range and fine transient detail, aptX Adaptive preserves more of that character across the Bluetooth link than lower-tier codecs. The AT-LP70XBT automatically negotiates aptX Adaptive when paired with a compatible receiver; it falls back to aptX or SBC if the receiving device does not support the higher codec.\u003c\/p\u003e\n\n\u003ch3\u003eCan the AT-VM95C cartridge be upgraded on the AT-LP70XBT?\u003c\/h3\u003e\n\u003cp\u003eThe AT-VM95C cartridge body is permanently integrated into the headshell and cannot be swapped, but its stylus assembly is user-replaceable without tools and accepts any stylus in the Audio-Technica VM95 Series. Upgrades available include the AT-VMN95E elliptical, AT-VMN95EX, AT-VMN95ML micro-linear, and AT-VMN95SH Shibata. Each higher-tier stylus provides finer groove contact geometry, improved treble resolution, and reduced record wear per play, allowing the AT-LP70XBT to grow with the listener's system over time.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the AT-LP70XBT work with wired speakers as well as Bluetooth?\u003c\/h3\u003e\n\u003cp\u003eYes. The AT-LP70XBT includes a detachable dual RCA male to dual RCA male cable with a grounding wire for conventional wired connection to any amplifier or powered speaker. The built-in switchable preamplifier can be set to phono output (4.0 mV) for components with a dedicated phono input, or line output (252 mV) for those using a standard aux or RCA line input. Bluetooth and wired output operate independently; either can be used at any time regardless of how the other is configured.\u003c\/p\u003e\n\n\u003ch3\u003eWhat Bluetooth speakers or headphones work best with the AT-LP70XBT?\u003c\/h3\u003e\n\u003cp\u003eThe AT-LP70XBT is compatible with any Bluetooth A2DP device. For the best wireless audio quality, pairing with an aptX Adaptive-capable receiver extracts the most from the Bluetooth connection; compatible options include the Sonos Era 100 and select Sony and Sennheiser headphones supporting aptX Adaptive. Standard aptX-compatible speakers such as the Audio-Technica AT-SP65XBT also work at very good quality. Any SBC-only device will pair and play but at standard Bluetooth quality.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I buy the Audio-Technica AT-LP70XBT in Toronto or Canada?\u003c\/h3\u003e\n\u003cp\u003eThe Audio-Technica AT-LP70XBT is available at Vinyl Sound, an authorised Audio-Technica dealer in Toronto, Canada. Vinyl Sound carries the AT-LP70XBT alongside VM95 Series stylus upgrades, compatible Bluetooth and wired speakers, and a full range of Audio-Technica accessories. Visit the Vinyl Sound Toronto store or shop at vinylsound.ca for current colour availability and stock.\u003c\/p\u003e","brand":"Audio Technica","offers":[{"title":"Black\/Silver","offer_id":49140753694972,"sku":null,"price":329.0,"currency_code":"CAD","in_stock":true},{"title":"Black\/Bronze","offer_id":49140753727740,"sku":null,"price":329.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0116\/1773\/0617\/files\/at-lp70xbt_bs_04_1_2.webp?v=1779935776","url":"https:\/\/vinylsound.ca\/products\/audio-technica-at-lp70xbt-fully-automatic-wireless-belt-drive-turntable","provider":"Vinyl Sound Canada Inc.","version":"1.0","type":"link"}