{"product_id":"dynavector-aska-h-l-phono-cartridge","title":"Dynavector ASKA-H\/L Phono Cartridge","description":"\u003ch1\u003eDynavector ASKA-H\/L Moving Coil Phono Cartridge at Vinyl Sound Toronto Canada\u003c\/h1\u003e\n\u003cp\u003eThe ASKA is an entry-level moving coil phono cartridge from Dynavector (Japan), available at Vinyl Sound in Toronto, Canada. Developed by a manufacturer with nearly 50 years of MC cartridge expertise, the ASKA carries Dynavector's full high-end design philosophy into an accessible model, built around a \u003cstrong\u003eSpecial Annealing magnetic circuit using pure iron\u003c\/strong\u003e, a patented Softened Magnetism technology with neodymium magnets, and an \u003cstrong\u003eelliptical stylus on a 6 mm hardened aluminium cantilever\u003c\/strong\u003e. It is offered in two variants: the ASKA-H at \u003cstrong\u003e2.8 mV output\u003c\/strong\u003e for direct connection to MM phono stages, and the ASKA-L at 0.3 mV for use with a dedicated MC input or step-up transformer. Every ASKA is hand-assembled and individually inspected in Japan, making it the ideal first step into true MC playback for vinyl enthusiasts in Toronto and across Canada.\u003c\/p\u003e\n\u003ch2\u003eSpecial Annealing Magnetic Circuit and Softened Magnetism\u003c\/h2\u003e\n\u003cp\u003eThe magnetic circuit is the most critical component in any moving coil cartridge, and Dynavector applies the same pure iron construction and Special Annealing process to the ASKA that it uses in its flagship models. By carefully controlling annealing temperature, environment, and heating and cooling rates, Dynavector refines the magnetic properties of the circuit to minimise distortion while maximising resolution and dynamic openness. Alongside this, Dynavector's patented Softened Magnetism technology addresses a known weakness of neodymium magnets: the harsh, edgy character that powerful rare-earth magnets can introduce into the treble. By softening the magnetic field around the neodymium motor, the ASKA achieves the high output and clean channel separation of a powerful magnet system without sacrificing tonal smoothness.\u003c\/p\u003e\n\u003ch2\u003eTwo Models for Every System: ASKA-H and ASKA-L\u003c\/h2\u003e\n\u003cp\u003eThe ASKA-H uses Dynavector's proprietary high-output coil winding technology, where ultra-fine wire is wound many times around the coil bobbin to achieve a 2.8 mV output. This allows the ASKA-H to connect directly to a standard MM phono input (47 kOhm), or to an adjustable input set to 1 kOhm or higher, making it the easiest entry point into MC performance for listeners upgrading from a moving magnet setup. The ASKA-L, by contrast, outputs 0.3 mV and delivers the full, uncompromised characteristics of a traditional low-output MC cartridge, with recommended load impedance of 30 ohms or higher. It is ideally paired with a dedicated MC phono stage or a quality step-up transformer and rewards listeners with a more expansive, three-dimensional soundstage. Both variants are built to identical standards and share the same magnetic circuit, cantilever, and stylus geometry.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Annealing Magnetic Circuit:\u003c\/strong\u003e Pure iron magnetic circuit processed with precisely controlled annealing to refine magnetic properties, reducing distortion and extending resolution across the full frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Softened Magnetism Technology:\u003c\/strong\u003e Dynavector's proprietary technique softens the magnetic field of the neodymium motor to eliminate harsh treble coloration while retaining the high output and clean separation that neodymium magnets provide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Model Availability (ASKA-H and ASKA-L):\u003c\/strong\u003e The high-output ASKA-H (2.8 mV) connects directly to any MM phono input, while the low-output ASKA-L (0.3 mV) delivers traditional MC performance for use with MC phono stages or step-up transformers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElliptical Stylus:\u003c\/strong\u003e The elliptical contact profile tracks fine high-frequency groove modulations with greater accuracy than a spherical stylus, while remaining forgiving across a wide range of tonearm alignments, making it ideal for those new to MC cartridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm Hardened Aluminium Cantilever:\u003c\/strong\u003e The cantilever length and material are optimised for tracking stability and low moving mass, contributing to the ASKA's fast transient response and well-defined stereo imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded M2.5 Screw Holes:\u003c\/strong\u003e Integrated threaded mounting holes in the cartridge body eliminate the fiddly nut-and-bolt installation common to most cartridges, making alignment straightforward even for first-time MC installers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Assembled in Japan:\u003c\/strong\u003e Every ASKA is individually assembled and inspected at Dynavector's Japanese production facility, ensuring consistent build quality and precise adjustment across the entire production run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Tonearm Compatibility:\u003c\/strong\u003e At 5.8 g, the ASKA is compatible with a broad range of tonearms including the Rega RB series, Technics EPA-100, SME 3009 and 3012, and most modern and vintage unipivot and gimbal designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eHigh\/Low output moving coil cartridge with flux damper and softened magnetism\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage (ASKA-H)\u003c\/td\u003e\n\u003ctd\u003e2.8 mV (at 1 kHz, 5 cm\/sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Voltage (ASKA-L)\u003c\/td\u003e\n\u003ctd\u003e0.3 mV (at 1 kHz, 5 cm\/sec)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Separation\u003c\/td\u003e\n\u003ctd\u003e25 dB (at 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Balance\u003c\/td\u003e\n\u003ctd\u003e1.0 dB (at 1 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20 Hz to 20,000 Hz (+\/-2 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003e12 mm\/N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTracking Force\u003c\/td\u003e\n\u003ctd\u003e1.8 to 2.2 g (recommended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance (ASKA-H \/ ASKA-L)\u003c\/td\u003e\n\u003ctd\u003e150 ohms \/ 5 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Load Impedance (ASKA-H)\u003c\/td\u003e\n\u003ctd\u003e1,000 ohms or higher (MM input compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Load Impedance (ASKA-L)\u003c\/td\u003e\n\u003ctd\u003e30 ohms or higher\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCantilever\u003c\/td\u003e\n\u003ctd\u003e6 mm hardened aluminium pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStylus Tip\u003c\/td\u003e\n\u003ctd\u003eElliptical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.8 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eThreaded M2.5 screw holes (standard half-inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the Dynavector ASKA phono cartridge?\u003c\/h3\u003e\n\u003cp\u003eThe Dynavector ASKA is an entry-level moving coil phono cartridge manufactured in Japan, featuring a Special Annealing pure iron magnetic circuit, patented Softened Magnetism neodymium motor, and an elliptical stylus on a 6 mm hardened aluminium cantilever. It is offered in two variants: the ASKA-H (2.8 mV, for MM phono inputs) and the ASKA-L (0.3 mV, for MC phono stages or step-up transformers). Both are hand-assembled and individually inspected by Dynavector, a company with nearly 50 years of MC cartridge development history.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between the Dynavector ASKA-H and ASKA-L?\u003c\/h3\u003e\n\u003cp\u003eThe ASKA-H and ASKA-L share the same magnetic circuit, cantilever, and stylus, but differ in their coil winding and output voltage. The ASKA-H uses Dynavector's high-output coil winding technology to produce 2.8 mV, making it compatible with any standard MM phono input (47 kOhm) and eliminating the need for additional gain equipment. The ASKA-L produces 0.3 mV and requires a dedicated MC phono stage or a step-up transformer, offering the full sonic character of a traditional low-output MC with a wider and more three-dimensional soundstage for those with the appropriate downstream equipment.\u003c\/p\u003e\n\u003ch3\u003eHow does the Dynavector ASKA compare to the Ortofon 2M Blue or Audio-Technica VM540ML?\u003c\/h3\u003e\n\u003cp\u003eThe Dynavector ASKA operates on a fundamentally different principle from moving magnet cartridges such as the Ortofon 2M Blue or the Audio-Technica VM540ML. MC cartridges like the ASKA use a lighter moving coil assembly rather than a heavier magnet, resulting in lower moving mass, faster transient response, and a more open and three-dimensional soundstage. The ASKA-H matches the 2M Blue and VM540ML for ease of connection, plugging directly into any MM phono input, while delivering the characteristic MC qualities of sharper image focus, greater low-level detail retrieval, and a more natural decay of sustained notes. The ASKA-L goes further for listeners with a compatible MC phono stage, offering the uncompromised version of that performance.\u003c\/p\u003e\n\u003ch3\u003eWhat is Dynavector's Softened Magnetism technology?\u003c\/h3\u003e\n\u003cp\u003eSoftened Magnetism is a patented Dynavector technology that addresses the sonic trade-off inherent to neodymium magnets. Neodymium provides powerful magnetic force and high output, but its strong rare-earth field can introduce harshness and edginess into the upper frequencies. Dynavector's Softened Magnetism process modifies the magnetic field surrounding the neodymium motor to reduce this coloration, allowing the ASKA to benefit from the high output and clean channel separation of neodymium while delivering the smooth, natural treble response more commonly associated with alnico magnet designs.\u003c\/p\u003e\n\u003ch3\u003eWhich tonearms is the Dynavector ASKA compatible with?\u003c\/h3\u003e\n\u003cp\u003eThe Dynavector ASKA is compatible with a wide range of tonearms commonly found on popular turntables. At 5.8 g with a compliance of 12 mm\/N, the ASKA suits medium-mass arms including the Rega RB series (as fitted to the Planar 1, 2, and 3), the Technics EPA series (as on the SL-1200 and SL-1210), and classic arms such as the SME 3009 and 3012. The integrated M2.5 threaded mounting holes simplify installation on headshells including standard Ortofon and Audio-Technica headshells. For very high-mass arms, a lighter counterweight or optional mass adjustment may be needed.\u003c\/p\u003e\n\u003ch3\u003eCan the Dynavector ASKA-H connect to a standard MM phono input?\u003c\/h3\u003e\n\u003cp\u003eYes. The ASKA-H is specifically designed to connect directly to a standard MM phono input at 47 kOhm. Dynavector's proprietary high-output coil winding technology winds ultra-fine wire many times around the coil bobbin to achieve a 2.8 mV output, equivalent to the output level of most moving magnet cartridges. This means the ASKA-H can be installed as a straight upgrade from an MM cartridge without any changes to the phono stage, preamplifier, or amplifier. If the phono stage offers adjustable input impedance, settings of 1 kOhm or higher are also compatible.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy the Dynavector ASKA phono cartridge in Toronto or Canada?\u003c\/h3\u003e\n\u003cp\u003eThe Dynavector ASKA-H and ASKA-L are available at Vinyl Sound, an authorised Dynavector dealer located in Toronto, Canada. Vinyl Sound carries a full range of analog source components including turntables, phono cartridges, tonearms, and phono stages, and the team can advise on the correct ASKA variant for your existing system. Customers across Canada can purchase through Vinyl Sound's online store, and Toronto-area customers are welcome to visit in person for a demonstration and cartridge matching consultation.\u003c\/p\u003e","brand":"Dynavector","offers":[{"title":"ASKA (High)","offer_id":49119601918204,"sku":null,"price":650.0,"currency_code":"CAD","in_stock":true},{"title":"ASKA (Low)","offer_id":49119601950972,"sku":null,"price":650.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0116\/1773\/0617\/files\/DynavectorASKA-HLPhonoCartridge.png?v=1779248270","url":"https:\/\/vinylsound.ca\/products\/dynavector-aska-h-l-phono-cartridge","provider":"Vinyl Sound Canada Inc.","version":"1.0","type":"link"}