{"product_id":"klipsch-kph800w-pendant-housing-for-speaker","title":"Klipsch KPH-800W Pendant Housing for Speaker (Each)","description":"\u003ch1\u003eKlipsch KPH-800W Pendant Housing for IC-800-T and IC-SW-8T2 Speakers at Vinyl Sound Toronto Canada\u003c\/h1\u003e\n\n\u003cp\u003eThe KPH-800W is a white aluminum pendant housing from Klipsch (Indianapolis, Indiana, USA), available at Vinyl Sound in Toronto, Canada. Sold individually as a single unit, the KPH-800W is designed exclusively to house the Klipsch IC-800-T 8\" 2-way 70\/100V in-ceiling commercial loudspeaker or the IC-SW-8T2 8\" in-ceiling 70\/100V commercial subwoofer, converting either speaker into a \u003cstrong\u003esuspended pendant-mount unit\u003c\/strong\u003e for overhead distributed sound in high-ceiling or open-ceiling commercial environments. Constructed from \u003cstrong\u003e1.5mm aluminum\u003c\/strong\u003e, the KPH-800W is larger and heavier-gauge than the KPH-525 series, reflecting the greater size and weight of the compatible 8\" speaker models it is engineered to house. It weighs approximately \u003cstrong\u003e2.2 lbs without speaker or cables\u003c\/strong\u003e, features a \u003cstrong\u003ethree-point balance cable suspension system\u003c\/strong\u003e converging to a single 9.5' drop cable, and ships with all necessary suspension hardware including S-hooks and a Fast Link cable joiner for a complete single-speaker pendant installation.\u003c\/p\u003e\n\n\u003ch2\u003eBringing Klipsch IC-800-T and IC-SW-8T2 Performance to High-Ceiling Environments\u003c\/h2\u003e\n\u003cp\u003eThe KPH-800W addresses the challenge of delivering high-output, high-coverage overhead audio in commercial spaces where a suspended ceiling grid is absent or where ceiling heights place conventional flush-mount speakers too far above the listening zone for effective distributed coverage. When the IC-800-T is installed in the KPH-800W, the pendant system brings that speaker's 92 dB sensitivity, 49 Hz to 20 kHz frequency response, 75° tight coverage pattern, 100W continuous power handling, and 111 dB maximum continuous SPL down to an appropriate listening height, suspended from the structural ceiling above by the three-point balance cable system. The IC-800-T's 70\/100V multi-tap transformer, with its rotary tap selector on the front baffle, remains accessible through the pendant housing for field adjustment of the amplifier power tap without removing the speaker. When the IC-SW-8T2 subwoofer is used instead, the pendant configuration provides a pendant-hung subwoofer for distributed bass reinforcement in high-ceiling spaces, complementing full-range pendant or in-ceiling speakers in the same zone. Common applications for the KPH-800W include restaurants with open structural ceilings, hotel atriums and lobbies, airport and transit concourses, sports facilities, retail stores with warehouse-height ceilings, houses of worship with high nave or sanctuary ceilings, and convention centre spaces where flexible audio coverage at multiple heights is required.\u003c\/p\u003e\n\n\u003ch2\u003eSuspension System, Installation, and Safety\u003c\/h2\u003e\n\u003cp\u003eThe KPH-800W's three-point balance cable suspension uses three equally spaced S-hook attachment points around the rim of the pendant housing, connecting to balance cables that converge at a single point above the housing where the 9.5' drop cable is attached. This triangulated suspension geometry distributes the weight of the housing and installed speaker evenly across three points, preventing the pendant from tilting and ensuring the IC-800-T or IC-SW-8T2 driver faces straight downward without any manual aiming adjustment after installation. The Fast Link cable joiner provided with the housing simplifies cable management during installation. Klipsch provides a dedicated safety cable attachment point on the IC speaker backcan, allowing a separate independent safety retention cable to be run from the speaker assembly to the structural ceiling above, separate from the primary suspension system. This safety cable is not included with the KPH-800W but is strongly recommended for compliance with commercial building codes and suspended speaker installation best practices in occupied public spaces throughout Canada. Speaker wire is routed through the housing top and out the bottom during installation, connecting to the IC speaker's terminal strip inside the housing, and the speaker is secured to the housing using four Phillips screws that lock the speaker frame's dog legs into the housing wall.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesigned for IC-800-T and IC-SW-8T2:\u003c\/strong\u003e Precisely dimensioned aluminum enclosure accepts the Klipsch IC-800-T 8\" 2-way full-range loudspeaker or IC-SW-8T2 8\" commercial subwoofer with integrated backcans, retaining their full acoustic performance in a suspended pendant format.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5mm Aluminum Housing:\u003c\/strong\u003e Heavier-gauge aluminum construction than the smaller KPH-525 series, proportionate to the larger 8\" compatible speakers, providing structural rigidity and durability in commercial environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Ceiling and No-Ceiling-Grid Solution:\u003c\/strong\u003e Suspends the IC-800-T or IC-SW-8T2 from structural ceiling attachment points in spaces with vaulted, structural, exposed, or open ceilings where no suspended ceiling grid exists for conventional flush mounting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-Point Balance Cable Suspension:\u003c\/strong\u003e Three equally spaced balance cable attachment points converging to a single drop cable ensure level hanging and straight-down driver aim without manual adjustment after installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e9.5' Drop Cable Included:\u003c\/strong\u003e Each housing ships with a 9.5' drop cable and three balance cables with S-hooks per the standard installation configuration, covering most commercial ceiling height applications without additional cable procurement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSafety Cable Attachment on IC Speaker Backcan:\u003c\/strong\u003e Independent safety cable attachment point on the IC speaker backcan allows a separate safety retention cable to the ceiling structure, consistent with best practices for suspended commercial speaker installations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast Link Cable Joiner Included:\u003c\/strong\u003e One Fast Link cable joiner simplifies wiring management during installation, providing a professional cable connection without exposed connector hardware.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIC-800-T Subwoofer Pendant Option:\u003c\/strong\u003e The KPH-800W accepts the IC-SW-8T2 8\" in-ceiling subwoofer, enabling a pendant-hung subwoofer configuration for distributed bass reinforcement in high-ceiling commercial audio systems, without requiring a floor-standing or surface-mount subwoofer enclosure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWhite Finish:\u003c\/strong\u003e White aluminum finish matches standard commercial interior colour schemes in hospitality, retail, institutional, and healthcare environments; a paintable version is also available for custom colour matching.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold Individually:\u003c\/strong\u003e The KPH-800W is sold as a single housing, allowing the system designer to purchase precisely the quantity required for a project without being constrained to pair or multi-unit packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible Speakers\u003c\/td\u003e\n      \u003ctd\u003eKlipsch IC-800-T, IC-SW-8T2 (70\/100V in-ceiling speakers with integrated backcans)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHousing Material\u003c\/td\u003e\n      \u003ctd\u003e1.5mm aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSuspension System\u003c\/td\u003e\n      \u003ctd\u003eThree-point balance cables converging to single drop cable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePendant Diameter at Base\u003c\/td\u003e\n      \u003ctd\u003e16.8\" (42.7 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFlange Diameter\u003c\/td\u003e\n      \u003ctd\u003e12.5\" (31.8 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePendant Height\u003c\/td\u003e\n      \u003ctd\u003e13.7\" (34.8 cm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrop Cable Length\u003c\/td\u003e\n      \u003ctd\u003e9.5' (2.5 m)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eNet Weight (housing only)\u003c\/td\u003e\n      \u003ctd\u003eApproximately 2.2 lbs (1.0 kg) without speaker or cables\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eWhite (KPH-800W)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAvailable Finishes\u003c\/td\u003e\n      \u003ctd\u003eWhite, Black, Paintable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackage Quantity\u003c\/td\u003e\n      \u003ctd\u003eEach (single housing)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIC-800-T Sensitivity\u003c\/td\u003e\n      \u003ctd\u003e92 dB @ 2.83V \/ 1m\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIC-800-T Frequency Response\u003c\/td\u003e\n      \u003ctd\u003e49 Hz - 20 kHz (+\/- 4 dB)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIC-800-T Max Continuous SPL\u003c\/td\u003e\n      \u003ctd\u003e111 dB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIC-800-T Coverage Angle\u003c\/td\u003e\n      \u003ctd\u003e75°\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIC-800-T Power Handling\u003c\/td\u003e\n      \u003ctd\u003e100W continuous (22V) \/ 400W peak\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIC-800-T Transformer Taps\u003c\/td\u003e\n      \u003ctd\u003e70V: 100W, 50W, 25W, 12.5W \/ 100V: 100W, 50W, 25W \/ 6.5 ohm bypass\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDistributed Audio Compatibility\u003c\/td\u003e\n      \u003ctd\u003e70V and 100V (via IC-800-T or IC-SW-8T2 transformer)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOne KPH-800W aluminum pendant housing (white)\u003c\/li\u003e\n  \u003cli\u003eOne 9.5' (2.5m) drop cable attached to three balance cables with S-hooks\u003c\/li\u003e\n  \u003cli\u003eOne Fast Link cable joiner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the Klipsch KPH-800W?\u003c\/h3\u003e\n\u003cp\u003eThe Klipsch KPH-800W is a single white 1.5mm aluminum pendant housing designed exclusively to accept the Klipsch IC-800-T 8\" 2-way 70\/100V in-ceiling loudspeaker or the IC-SW-8T2 8\" in-ceiling commercial subwoofer, converting either speaker into a suspended pendant-mount unit for high-ceiling or open-ceiling commercial installations. It measures 16.8\" in diameter at the base, 12.5\" flange diameter, and 13.7\" in height, weighs approximately 2.2 lbs without speaker or cables, and ships with a 9.5' drop cable, three balance cables with S-hooks, and a Fast Link cable joiner.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the KPH-800W and the KPH-525?\u003c\/h3\u003e\n\u003cp\u003eThe KPH-800W and the KPH-525 are both Klipsch aluminum pendant housings for the IC Series in-ceiling speakers, but are sized for different speaker models. The KPH-525 is designed for the smaller IC-400-T, IC-500-T-SC, and IC-525-T speakers, features 1mm aluminum construction, measures 11.6\" in diameter and 9.4\" in height, and weighs approximately 1.25 lbs per housing. The KPH-800W is designed for the larger IC-800-T and IC-SW-8T2 speakers, uses heavier 1.5mm aluminum construction, measures 16.8\" in diameter and 13.7\" in height, and weighs approximately 2.2 lbs. The KPH-525 is sold in pairs while the KPH-800W is sold individually. Both use the same three-point balance cable suspension system with a 9.5' drop cable and Fast Link cable joiner.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Klipsch speakers are compatible with the KPH-800W?\u003c\/h3\u003e\n\u003cp\u003eThe KPH-800W is specifically designed to house the Klipsch IC-800-T 8\" 2-way full-range 70\/100V in-ceiling loudspeaker and the Klipsch IC-SW-8T2 8\" 70\/100V in-ceiling commercial subwoofer. Both speakers are UL-certified and feature integrated backcans that secure within the KPH-800W housing via four Phillips screws engaging the speaker frame's dog leg clips. The Klipsch PIC-800-T BW and PIC-800-SW BW are also listed as compatible in some market regions. Speakers are sold separately from the pendant housing and are not included with the KPH-800W.\u003c\/p\u003e\n\n\u003ch3\u003eWhat types of commercial spaces is the KPH-800W designed for?\u003c\/h3\u003e\n\u003cp\u003eThe KPH-800W is designed for commercial spaces with high structural ceilings, open beam or exposed ceiling structures, or spaces where no suspended ceiling grid exists for conventional in-ceiling speaker installation. Typical applications include high-ceiling restaurants and food halls, hotel atriums, airport concourses and terminals, sports facilities and health clubs, retail stores with warehouse-height ceilings, houses of worship with high nave or sanctuary ceilings, convention centres, transit stations, and industrial or manufacturing environments requiring background music, paging, or distributed audio coverage at ceiling level. The IC-800-T's 75° tight coverage pattern and 92 dB sensitivity are well matched to high-ceiling applications where the speaker must cover a large floor area from a significantly elevated mounting position.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I buy the Klipsch KPH-800W in Toronto or Canada?\u003c\/h3\u003e\n\u003cp\u003eThe Klipsch KPH-800W is available at Vinyl Sound, an authorised Klipsch dealer located in Toronto, Canada. Vinyl Sound serves customers across the Greater Toronto Area and ships throughout Canada, providing access to the complete Klipsch commercial installation loudspeaker range including the compatible IC-800-T and IC-SW-8T2 speakers. Purchasing from an authorised Canadian dealer ensures full manufacturer warranty coverage and access to professional support for commercial distributed audio system design.\u003c\/p\u003e\n\n\u003ch3\u003eIs a safety cable required and is it included?\u003c\/h3\u003e\n\u003cp\u003eA safety cable is not included with the KPH-800W, but the Klipsch IC-800-T and IC-SW-8T2 speaker backcans include a dedicated safety cable attachment point specifically to allow a separate independent retention cable to be run from the speaker assembly to the structural ceiling above, separate from the primary three-point balance cable suspension. The use of a secondary safety cable is consistent with best practices for suspended speaker installations in occupied commercial spaces and is required under most commercial building codes in Canada for overhead speaker systems. System designers and installers should consult applicable local codes and rigging load guidelines to determine the specific safety cable and hardware requirements for their installation.\u003c\/p\u003e\n","brand":"Klipsch","offers":[{"title":"White","offer_id":16993858388025,"sku":"KPH800W","price":299.0,"currency_code":"CAD","in_stock":true},{"title":"Black","offer_id":16993858420793,"sku":"KPH800B","price":299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0116\/1773\/0617\/products\/KLIPSCH_KPH800W_PENDANT_HOUSING_FOR_SPEAKER_B_-_Vinyl_Sound.jpg?v=1543619799","url":"https:\/\/vinylsound.ca\/products\/klipsch-kph800w-pendant-housing-for-speaker","provider":"Vinyl Sound Canada Inc.","version":"1.0","type":"link"}