{"product_id":"mobile-fidelity-ultradeck-turntable","title":"Mobile Fidelity Ultradeck Turntable","description":"\u003ch1\u003eMobile Fidelity Electronics UltraDeck Turntable at Vinyl Sound Toronto Canada\u003c\/h1\u003e\n\n\u003cp\u003eThe UltraDeck is a 2-speed belt-drive turntable from Mobile Fidelity Electronics (MoFi Electronics, USA), available at Vinyl Sound in Toronto, Canada. Custom-designed and manufactured in the USA, the UltraDeck embodies Mobile Fidelity Sound Lab's decades-long pursuit of faithful reproduction of recorded music — the same philosophy behind MoFi's legendary Original Master Recordings and UltraDisc One-Step limited-edition vinyl pressings. At its foundation is MoFi's \u003cstrong\u003e10-inch Ultra Tonearm\u003c\/strong\u003e, a straight aluminum gimbaled-bearing assembly custom-built for low-friction, accurate tracking, paired with a \u003cstrong\u003e6.8-lb Delrin platter\u003c\/strong\u003e for a low noise floor and stable rotation. An isolated \u003cstrong\u003e300 RPM AC synchronous motor\u003c\/strong\u003e delivers measured wow and flutter of just 0.017% to 0.025%, and Harmonic Resolution Systems anti-vibration feet decouple the plinth from environmental vibration for clean, uncolored playback of every groove.\u003c\/p\u003e\n\n\u003ch2\u003e10-Inch MoFi Ultra Tonearm\u003c\/h2\u003e\n\u003cp\u003eThe UltraDeck is fitted with MoFi's 10-inch Ultra Tonearm, custom-designed and manufactured in the USA as a straight aluminum tube on a gimbaled bearing system using precision ball bearings in both the vertical and horizontal planes. The gimbaled architecture delivers consistent, low-friction tracking stability across both axes without the setup sensitivity associated with unipivot designs, allowing the stylus to follow groove modulations accurately from the outermost band to the lead-out groove. An 18mm overhang and 22.8-degree offset angle — adjustable plus or minus 2 degrees — place the stylus on a geometry that minimizes tracking error across the playing surface, and the arm accepts cartridges weighing between 5g and 10g, covering a broad range of moving-magnet designs and lighter moving-coil cartridges. The 10-inch effective length reduces the angular tracking error inherent in shorter arms, making the Ultra Tonearm a meaningful upgrade over the 8.6-inch and 9-inch arms found on many competing belt-drive turntables at this tier.\u003c\/p\u003e\n\n\u003ch2\u003eIsolated AC Synchronous Motor, Delrin Platter, and HRS Isolation\u003c\/h2\u003e\n\u003cp\u003eThe UltraDeck's 300 RPM AC synchronous motor is mechanically isolated from the plinth to prevent motor-borne vibration from reaching the platter bearing or tonearm. The synchronous motor design locks rotational speed to the frequency of the AC supply, producing the measured wow and flutter performance of 0.017% to 0.025% — figures that reflect tight speed stability across both 33.3 and 45 RPM playback rates. The 6.8-lb Delrin platter spins on a precision bearing and provides the playing surface for both standard LPs and MoFi's own UltraDisc One-Step pressings. Delrin, an acetal resin developed by DuPont, is chosen for its highly crystalline molecular structure, which presents an acoustic impedance closely matched to vinyl and efficiently dissipates groove-generated vibration into the platter mass rather than reflecting it back through the stylus as noise. Harmonic Resolution Systems anti-vibration feet beneath the plinth decouple the entire assembly from floor-borne vibration and acoustic feedback, preventing spurious stylus modulation that would otherwise mask low-level musical detail. Power supply compatibility spans 120V 60Hz, 220-230V 50Hz, and 100V 50Hz, making the UltraDeck usable worldwide with no voltage conversion required.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-Inch MoFi Ultra Tonearm:\u003c\/strong\u003e A custom-designed, USA-manufactured straight aluminum gimbaled-bearing tonearm with precision ball bearings in both axes for low-friction, stable cartridge tracking and reduced angular tracking error compared to shorter arm designs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6.8-Lb Delrin Platter:\u003c\/strong\u003e A high-mass DuPont Delrin platter matched to vinyl's acoustic impedance absorbs groove-generated vibration and provides a stable, low-noise playing surface for standard LPs and MoFi UltraDisc One-Step pressings alike.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIsolated 300 RPM AC Synchronous Motor:\u003c\/strong\u003e A mechanically isolated AC synchronous motor locks speed to the supply frequency for stable, low-drift rotation, achieving measured wow and flutter of 0.017% to 0.025%.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHarmonic Resolution Systems Anti-Vibration Feet:\u003c\/strong\u003e HRS-engineered isolation feet decouple the plinth and tonearm from floor-borne vibration and acoustic feedback, ensuring the stylus responds only to groove modulations rather than environmental interference.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCustom Designed and Manufactured in the USA:\u003c\/strong\u003e The tonearm and turntable assembly are custom-designed and built domestically, reflecting MoFi Electronics' commitment to American engineering and quality control.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e33.3 and 45 RPM Belt Drive:\u003c\/strong\u003e A precision belt-drive system isolates the motor from the bearing and platter for quiet, low-noise rotation at both standard LP and 45 RPM single speeds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.017% to 0.025% Wow and Flutter:\u003c\/strong\u003e Measured speed stability at this level ensures pitch accuracy and temporal precision across all music types, from solo piano to orchestral works.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e74 dB Signal-To-Noise Ratio:\u003c\/strong\u003e A high signal-to-noise ratio reflects the combined contribution of the isolated motor, HRS feet, and Delrin platter in keeping spurious noise well below the musical signal.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUniversal Power Supply Compatibility:\u003c\/strong\u003e Accepts 120V 60Hz, 220-230V 50Hz, and 100V 50Hz mains supplies for worldwide use without a voltage converter.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnder 5 Watts Power Consumption:\u003c\/strong\u003e Extremely low power draw reflects the efficiency of the AC synchronous motor and its associated control electronics.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable Tonearm Geometry:\u003c\/strong\u003e Offset angle adjustment of plus or minus 2 degrees around the 22.8-degree nominal allows fine cartridge alignment optimization for individual cartridges and stylus profiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDrive System\u003c\/td\u003e\n      \u003ctd\u003eBelt drive\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMotor\u003c\/td\u003e\n      \u003ctd\u003e300 RPM AC synchronous, mechanically isolated\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSpeeds\u003c\/td\u003e\n      \u003ctd\u003e33.3 RPM, 45.0 RPM\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePlatter\u003c\/td\u003e\n      \u003ctd\u003e6.8 lb Delrin (1.3-inch thickness)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWow and Flutter\u003c\/td\u003e\n      \u003ctd\u003e0.017% to 0.025%\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSignal-To-Noise Ratio\u003c\/td\u003e\n      \u003ctd\u003e74 dB\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIsolation Feet\u003c\/td\u003e\n      \u003ctd\u003eHarmonic Resolution Systems (HRS) anti-vibration feet\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTonearm Type\u003c\/td\u003e\n      \u003ctd\u003e10-inch straight aluminum, gimbaled bearing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOverhang\u003c\/td\u003e\n      \u003ctd\u003e0.71 inches (18 mm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOffset Angle\u003c\/td\u003e\n      \u003ctd\u003e22.8 degrees (plus or minus 2 degrees adjustable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCartridge Weight Range\u003c\/td\u003e\n      \u003ctd\u003e5g to 10g\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Supply\u003c\/td\u003e\n      \u003ctd\u003e120V 60Hz, 220-230V 50Hz, 100V 50Hz\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Consumption\u003c\/td\u003e\n      \u003ctd\u003eLess than 5 Watts\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n      \u003ctd\u003e19.69 x 5.375 x 14.25 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e23.1 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eManufacturer\u003c\/td\u003e\n      \u003ctd\u003eMobile Fidelity Electronics (MoFi Electronics), USA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the MoFi Electronics UltraDeck turntable?\u003c\/h3\u003e\n\u003cp\u003eThe UltraDeck is a 2-speed belt-drive turntable from Mobile Fidelity Electronics, custom-designed and manufactured in the USA. It features a 10-inch straight aluminum gimbaled-bearing Ultra Tonearm, a 6.8-lb Delrin platter, a mechanically isolated 300 RPM AC synchronous motor, and Harmonic Resolution Systems anti-vibration feet. Measured wow and flutter of 0.017% to 0.025% and a signal-to-noise ratio of 74 dB reflect its precision engineering, and it is compatible with power supplies worldwide. It is available at Vinyl Sound in Toronto, Canada.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the UltraDeck compare to the Pro-Ject X2 B and the Rega Planar 3?\u003c\/h3\u003e\n\u003cp\u003eThe UltraDeck holds meaningful technical advantages over both competitors. Against the Pro-Ject X2 B, which uses a 10-inch carbon-fiber sandwich tonearm, a 1.4kg aluminum platter, and a DC motor with electronic speed control, the UltraDeck counters with a heavier 6.8-lb Delrin platter for greater rotational inertia and lower noise floor, HRS isolation feet versus the Pro-Ject's standard rubber feet, and a USA-manufactured tonearm rather than an imported assembly. Against the Rega Planar 3, which uses a lightweight phenolic plinth, a 24V AC motor, and Rega's own RB330 tonearm in a 9-inch geometry, the UltraDeck offers a longer 10-inch arm for reduced angular tracking error, a substantially heavier Delrin platter, and HRS vibration isolation that the Planar 3's lightweight philosophy explicitly avoids. Neither the X2 B nor the Planar 3 is designed with MoFi's UltraDisc One-Step pressings specifically in mind, making the UltraDeck the natural partner for owners of MoFi's own high-resolution vinyl releases.\u003c\/p\u003e\n\n\u003ch3\u003eCan the UltraDeck play MoFi UltraDisc One-Step records?\u003c\/h3\u003e\n\u003cp\u003eYes, the UltraDeck is specifically suited to playing MoFi UltraDisc One-Step limited-edition pressings. Mobile Fidelity designed the UltraDeck to be the ideal playback partner for its own high-resolution vinyl releases, and the combination of a 6.8-lb Delrin platter, isolated AC synchronous motor, and 10-inch Ultra Tonearm provides the speed stability, low noise floor, and precise tracking geometry needed to retrieve the full resolution encoded in UltraDisc One-Step records. Standard 33.3 and 45 RPM LPs are equally well served by the same engineering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the UltraDeck and the MasterDeck?\u003c\/h3\u003e\n\u003cp\u003eThe MasterDeck sits above the UltraDeck as MoFi Electronics' reference-grade turntable, adding several significant engineering upgrades. The MasterDeck uses a three-phase brushless DC motor with optical speed regulation for active real-time speed correction, versus the UltraDeck's 300 RPM AC synchronous motor that relies on supply frequency stability. The MasterDeck also adds 78 RPM capability with fine-speed trim adjustment, a heavier 14.35-lb hybrid Aluminum-Delrin platter versus the UltraDeck's 6.8-lb Delrin platter, an Encapsulated Spiral Groove Inverted Bearing versus the UltraDeck's standard bearing, a dual-pivot unipivot\/gimbal hybrid tonearm with Cardas Audio wiring versus the UltraDeck's straight gimbaled arm, and a solid wood frame finished in Walnut or Black Ash. The UltraDeck delivers the core MoFi engineering philosophy at a more accessible level, while the MasterDeck represents the company's no-compromise reference statement.\u003c\/p\u003e\n\n\u003ch3\u003eWhat cartridge should I use with the UltraDeck?\u003c\/h3\u003e\n\u003cp\u003eThe UltraDeck's 10-inch Ultra Tonearm accepts cartridges weighing between 5g and 10g, covering the majority of moving-magnet designs and lighter moving-coil cartridges. MoFi Electronics' own UltraGold and UltraTracker moving-magnet cartridges are voiced to complement the UltraDeck's tonearm and Delrin platter, and both are available at Vinyl Sound in Toronto alongside the turntable itself. The adjustable 22.8-degree offset angle allows precise stylus alignment for any compatible cartridge to minimize distortion across the playing surface.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I buy the MoFi Electronics UltraDeck in Toronto or Canada?\u003c\/h3\u003e\n\u003cp\u003eThe MoFi Electronics UltraDeck turntable is available at Vinyl Sound, an authorized Mobile Fidelity Electronics dealer in Toronto, Canada. Vinyl Sound stocks the full MoFi Electronics turntable lineup including the UltraDeck, MasterDeck, and the MoFi x Fender American Vintage, and can assist customers across Toronto and Canada with cartridge selection, phono stage pairing, and setup guidance.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the UltraDeck work outside North America?\u003c\/h3\u003e\n\u003cp\u003eYes, the UltraDeck includes a universal power supply compatible with 120V 60Hz, 220-230V 50Hz, and 100V 50Hz mains voltages, making it usable in North America, Europe, Japan, and most other regions without a voltage converter or step-down transformer. Power consumption is under 5 watts, so the turntable places negligible demand on any standard household circuit regardless of regional voltage standard.\u003c\/p\u003e\n\n\u003ch3\u003eHow should I set up and position the UltraDeck for best performance?\u003c\/h3\u003e\n\u003cp\u003eThe UltraDeck performs best when placed on a level, rigid surface — a dedicated equipment rack or solid shelf — with adequate clearance on all sides for ventilation and access to the tonearm. The Harmonic Resolution Systems isolation feet handle the majority of floor-borne vibration decoupling, but the turntable benefits from being positioned away from loudspeakers to minimize acoustic feedback from the room. Cartridge alignment should be checked using the 18mm overhang and 22.8-degree offset angle as the starting point, with the offset angle adjusted within the available plus or minus 2-degree range to optimize stylus geometry for the specific cartridge in use. Vinyl Sound in Toronto can provide setup assistance and cartridge alignment guidance for customers purchasing the UltraDeck.\u003c\/p\u003e","brand":"Mobile Fidelity","offers":[{"title":"UltraDeck with no Cartridges","offer_id":35595208392872,"sku":"UltraDeck","price":2299.0,"currency_code":"CAD","in_stock":true},{"title":"UltraDeck + with factory aligned UltraTracker cartridge","offer_id":35595208425640,"sku":"UltraDeck+","price":2699.0,"currency_code":"CAD","in_stock":true},{"title":"UltraDeck +M with factory aligned MasterTracker cartridge","offer_id":35595208458408,"sku":"UltraDeck+M","price":2999.0,"currency_code":"CAD","in_stock":true},{"title":"UltraDeck +UG With UltraGold MC","offer_id":42323668893948,"sku":"UltraDeck+UG","price":3699.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0116\/1773\/0617\/products\/MOBILE-FIDELITY-ULTRADECK-TURNTABLE-FRONT-VINYLSOUND.jpg?v=1652361671","url":"https:\/\/vinylsound.ca\/products\/mobile-fidelity-ultradeck-turntable","provider":"Vinyl Sound Canada Inc.","version":"1.0","type":"link"}