Klipsch PRO-650T-LS 6.5" Outdoor Landscape Satellite Speaker (Single)

$799.00

Quantity

Product Details

Klipsch PRO-650T-LS 6.5" Outdoor Landscape Satellite Speaker (Single) at Vinyl Sound Toronto Canada

The PRO-650T-LS is a 6.5-inch two-way outdoor landscape satellite speaker from Klipsch (Indianapolis, Indiana, USA), available at Vinyl Sound in Toronto, Canada. Part of the Klipsch Professional Series landscape audio lineup built since 2016, the PRO-650T-LS combines a 6.5-inch IMG woofer with a 1-inch Aluminum Dome Tweeter mated to a custom 105-degree Tractrix® horn, delivering 90 dB sensitivity and a frequency range of 100 Hz to 24 kHz (+/- 3 dB). The integrated 50-watt 70V/100V multi-tap transformer with 8-ohm bypass makes the PRO-650T-LS compatible with residential low-impedance audio systems and commercial distributed line networks alike. The IP45-rated UV-resistant ABS cabinet is designed for permanent year-round outdoor installation in garden beds, along pathways, at poolside, and across any landscape where professional-grade outdoor audio is required.

High Performance Outdoor Audio with Tractrix® Horn Technology

The PRO-650T-LS applies the same acoustic design philosophy Klipsch has used across its premium indoor speaker lines to an outdoor landscape form factor engineered specifically for garden and exterior installation. The 1-inch Aluminum Dome Tweeter is mated to a purpose-built custom Tractrix® horn with a 105-degree horizontal dispersion pattern. The Tractrix® geometry is a mathematically optimized horn flare that reduces turbulence at the horn throat, lowers distortion at the tweeter diaphragm, and focuses the output into a wide, controlled coverage pattern. For outdoor landscape audio, where listeners are distributed across a large, irregularly shaped listening area rather than seated in a defined sweet spot, the 105-degree coverage angle ensures that the high-frequency content reaches every listening position with consistent level and tonal balance. The aluminum dome diaphragm adds stiffness and extended high-frequency response compared to polymer or silk dome alternatives, contributing to the PRO-650T-LS's measured frequency extension to 35 kHz at the -10 dB point.

6.5-Inch IMG Woofer

The low-frequency section of the PRO-650T-LS uses a 6.5-inch injection-molded graphite (IMG) woofer. IMG cone technology produces a diaphragm that is simultaneously rigid and lightweight, resisting cone breakup at the high excursion levels required to project meaningful bass output in open outdoor environments where no room boundaries provide low-frequency reinforcement. The PRO-650T-LS is designed as a landscape satellite speaker, intended to operate as part of a system that includes a dedicated outdoor subwoofer such as the Klipsch PRO-10SW-RK rock subwoofer for full-range low-frequency extension. In this satellite-plus-subwoofer configuration, the PRO-650T-LS handles midrange and treble content from 100 Hz upward while the subwoofer provides bass reinforcement below that point, producing full-range outdoor audio coverage across large residential and commercial landscape installations.

8-Ohm / 70V / 100V Compatibility

The PRO-650T-LS includes an integrated 50-watt multi-tap transformer that enables direct connection to 70V and 100V commercial distributed line audio systems without any external accessories. The transformer offers selectable tap settings for 70V operation at 6.25W, 12.5W, 25W, and 50W, and for 100V operation at 12.5W, 25W, and 50W, plus an 8-ohm bypass for standard low-impedance residential connection. All settings are selectable via a tool-free rotary switch on the back of the speaker, covered by a custom-designed silicone switch cover that prevents water ingress at the selector interface. This makes the PRO-650T-LS the correct choice for large estate landscape audio systems, commercial hospitality installations, resort pools, and any project where 70V distributed line wiring is used to serve multiple speaker zones across long cable runs from a central amplifier location.

Maximum Installation Flexibility

The PRO-650T-LS is engineered for tool-free installation in multiple mounting configurations. The speaker is compatible with both the optional 18-inch PRO-18-GS ground stake and a 10-inch ground stake option (both sold separately), allowing it to be positioned directly in garden beds, lawn borders, and planted areas at ground level with the driver firing horizontally into the listening space. A surface mount arm (PRO-1-SM, sold separately) is also available for mounting the PRO-650T-LS to walls, fences, pergola posts, and other vertical surfaces in outdoor living areas. The brown matte finish blends into natural landscape environments, and the paintable cabinet surface allows further color customization to match specific landscaping palettes or architectural finishes.

All-Weather Durability and IP45 Rating

The PRO-650T-LS is built for permanent year-round outdoor installation across a full range of climate conditions including the seasonal temperature swings, rain, snow, and freeze-thaw cycles of Canadian outdoor environments. The cabinet is constructed from UV-resistant, mechanically reinforced, glass-filled ABS plastic that resists sun bleaching, impact damage, and moisture absorption over multi-year outdoor installation. The grille is made from rustproof aluminum, eliminating the corrosion and discoloration that affects steel grilles in wet outdoor environments. The IP45 rating certifies the PRO-650T-LS against particulate ingress and water jet exposure from any direction, confirming its suitability for rain, garden irrigation spray, and poolside splash environments. The silicone switch cover seals the impedance selector against water penetration at the cabinet's most vulnerable entry point.

Key Features

  • 6.5-Inch IMG Woofer: A stiff, lightweight injection-molded graphite cone delivers midrange and upper bass output from 100 Hz upward, designed to operate as a landscape satellite speaker paired with a dedicated outdoor subwoofer for full-range coverage.
  • 1-Inch Aluminum Dome Tweeter with 105-Degree Custom Tractrix® Horn: An aluminum diaphragm mated to a purpose-built Tractrix® horn provides high-frequency clarity, low distortion, and a consistent 105-degree horizontal coverage pattern suited to wide, open outdoor listening environments.
  • Integrated 50-Watt 70V/100V Multi-Tap Transformer: Selectable tap settings for 70V (6.25W, 12.5W, 25W, 50W) and 100V (12.5W, 25W, 50W) distributed line operation, plus 8-ohm bypass for residential low-impedance use, all selectable via a tool-free rear rotary switch.
  • 90 dB Sensitivity: High efficiency enables the PRO-650T-LS to produce clear, detailed audio from the modest power levels available at individual tap settings in commercial 70V distributed systems serving many speakers simultaneously.
  • IP45-Rated All-Weather Cabinet: UV-resistant, glass-filled, mechanically reinforced ABS plastic with a rustproof aluminum grille and silicone-sealed switch cover provides certified IP45 protection for permanent outdoor installation.
  • Tool-Free Ground Stake and Surface Mount Installation: Compatible with optional 18-inch and 10-inch ground stake accessories for garden bed placement, and a surface mount arm for vertical surface installation, all without tools.
  • Brown Matte, Paintable Finish: The factory brown matte coloring blends into natural landscape environments, and the paintable surface allows customization to match specific outdoor decor or architectural color schemes.
  • 100W Peak Power Handling: Handles transient peaks up to 100 watts, providing headroom above the continuous power levels used in both 70V distributed systems and residential low-impedance outdoor amplifiers.

Technical Specifications

Frequency Range (+/- 3 dB) 100 Hz - 24 kHz
Frequency Range (+/- 6 dB) 92 Hz - 30 kHz
Frequency Range (+/- 10 dB) 77 Hz - 35 kHz
High Frequency Driver 1" (2.54 cm) Aluminum Dome Tweeter mated to a 105° Custom Tractrix® Horn
Low Frequency Driver 6.5" (16.51 cm) IMG Woofer
Sensitivity 90 dB
Coverage Angle 105° Horizontal
Power Handling 100W Peak
Impedance / Line Compatibility 8 Ohm Bypass / 70V / 100V
70V Tap Settings 6.25W, 12.5W, 25W, 50W
100V Tap Settings 12.5W, 25W, 50W
Enclosure Material UV-Treated, Glass-Filled ABS Cabinet
Grille Material Rustproof Aluminum
IP Rating IP45
Finish Brown Matte, Paintable
Product Dimensions 8.27" x 8.82" x 11.02" (210 mm x 224 mm x 280 mm)
Product Weight 7 lbs (3.18 kg)
Optional Ground Stake PRO-18-GS 18" Ground Stake (Sold Separately)
Optional Surface Mount Arm PRO-1-SM (Sold Separately)

Frequently Asked Questions

What is the Klipsch PRO-650T-LS?

The Klipsch PRO-650T-LS is a 6.5-inch two-way outdoor landscape satellite speaker from the Klipsch Professional Series, featuring an IMG woofer, a 1-inch Aluminum Dome Tweeter on a 105-degree custom Tractrix® horn, and an integrated 50-watt 70V/100V multi-tap transformer with 8-ohm bypass. It delivers 90 dB sensitivity and is IP45-rated for permanent year-round outdoor installation in garden landscapes, patios, poolside areas, and commercial outdoor audio installations.

How does the Klipsch PRO-650T-LS compare to the Polk Audio Atrium 6 or Yamaha NS-AW150 outdoor speakers?

The PRO-650T-LS outperforms the Polk Audio Atrium 6 and Yamaha NS-AW150 in three meaningful ways. First, the Tractrix® horn-loaded Aluminum Dome Tweeter delivers 90 dB sensitivity and a 105-degree controlled dispersion pattern, while both the Polk and Yamaha use conventional dome tweeters without a horn, producing narrower, less efficient high-frequency output. Second, the PRO-650T-LS includes a built-in 70V/100V transformer, making it compatible with commercial distributed audio systems that neither the Polk nor Yamaha models support. Third, the PRO-650T-LS's IP45 rating and glass-filled, mechanically reinforced ABS cabinet are purpose-built for landscape ground-stake installation, whereas the Polk Atrium 6 and Yamaha NS-AW150 are primarily surface-mount designs without native ground stake mounting provisions.

Can the Klipsch PRO-650T-LS be used on a 70V distributed audio system?

Yes, the PRO-650T-LS is specifically designed for 70V and 100V distributed line audio systems commonly used in commercial landscape audio installations, large estate residential systems, hospitality venues, and resort pools. The integrated 50-watt multi-tap transformer provides selectable tap settings at 6.25W, 12.5W, 25W, and 50W for 70V systems and at 12.5W, 25W, and 50W for 100V systems, all selectable from a tool-free rotary switch on the rear of the cabinet. The 8-ohm bypass position enables standard low-impedance residential connection to any stereo or multi-zone amplifier.

Does the PRO-650T-LS need a subwoofer for outdoor use?

For most landscape audio applications, pairing the PRO-650T-LS with a dedicated outdoor subwoofer such as the Klipsch PRO-10SW-RK rock subwoofer delivers the best full-range performance. The PRO-650T-LS is a satellite speaker with a frequency range starting at 100 Hz (+/- 3 dB), meaning it does not reproduce deep bass on its own. In open outdoor environments where low frequencies dissipate rapidly without room boundary reinforcement, a dedicated outdoor subwoofer adds the bass foundation that makes landscape audio systems sound full and impactful. For background music and lower-volume outdoor listening, the PRO-650T-LS performs adequately as a standalone satellite, but the satellite-plus-subwoofer configuration is strongly recommended for critical listening and higher-output applications.

How is the Klipsch PRO-650T-LS installed outdoors?

The PRO-650T-LS supports two primary installation methods. The most common approach for landscape audio is ground stake installation, using either the optional 18-inch PRO-18-GS stake or a 10-inch stake (both sold separately), which push directly into soil in garden beds, lawn borders, and planted areas without any tools. The speaker body mounts on the stake and can be aimed horizontally toward the listening area. For vertical surface installation on walls, fences, pergola columns, and architectural features, the optional PRO-1-SM surface mount arm (sold separately) is specifically engineered for the PRO-650T-LS. The impedance and tap selector on the rear is adjustable without tools via a rotary switch sealed under a silicone cover.

Can the Klipsch PRO-650T-LS handle Canadian outdoor winter conditions?

Yes, the PRO-650T-LS is designed for permanent year-round outdoor installation including the seasonal conditions experienced in Toronto and across Canada. The UV-resistant, glass-filled, mechanically reinforced ABS cabinet withstands freeze-thaw cycling, solar UV exposure, and moisture across the full Canadian seasonal range. The rustproof aluminum grille eliminates corrosion concerns in wet conditions, and the IP45 rating confirms protection against water jets from any direction, covering rain, snow melt, and irrigation overspray. The silicone switch cover seals the impedance selector against water ingress. For extended Canadian winters, some outdoor audio system owners choose to disconnect and store ground-stake speakers during the coldest months, though the PRO-650T-LS is rated for permanent outdoor installation.

Where can I buy the Klipsch PRO-650T-LS in Toronto or Canada?

The Klipsch PRO-650T-LS is available at Vinyl Sound, an authorised Klipsch dealer in Toronto, Canada. Vinyl Sound carries the full Klipsch Professional Series outdoor landscape audio range and can assist with system design, subwoofer pairing, amplifier selection, and installation accessory guidance including the PRO-18-GS ground stake and PRO-1-SM surface mount arm for residential and commercial landscape audio projects across the Greater Toronto Area and surrounding regions of Ontario.

Is the Klipsch PRO-650T-LS sold individually or as a pair?

The PRO-650T-LS is sold individually as a single speaker unit. For stereo landscape audio in a garden zone, two units are required. For distributed multi-zone landscape systems using 70V or 100V wiring, the quantity depends on the coverage area, tap settings selected per speaker, and the total wattage available from the distributed line amplifier.

View More