Add to shopping cart is not available for some Yamaha Products, Please call or email us to place your orders.

Yamaha SPS-5000 Speaker Stand for NS-5000 at Vinyl Sound Toronto Canada

The SPS-5000 is a dedicated speaker stand from Yamaha (Japan), available at Vinyl Sound in Toronto, Canada. Engineered exclusively for the Yamaha NS-5000 loudspeaker through sophisticated simulation analysis, the SPS-5000 features solid aluminium legs set at a precisely calculated 42-degree angle to the baffle surface, a total weight of 8.0kg per unit, and a working height of 304mm with spikes that positions the NS-5000's tweeter at the ideal ear level for a seated listener. Steel cut spike feet, height-adjustment spacers, and speaker-fixing screws are included, with rubber leg caps available for hard floor installations. Every geometric and material decision in the SPS-5000 was made in service of a single goal: to support the NS-5000 without introducing any undesired acoustic or mechanical artifact of its own.

Simulation-Driven Design for Acoustic Neutrality

The SPS-5000 was developed using sophisticated acoustic simulation analysis to identify and eliminate every potential source of stand-induced coloration before a physical prototype was built. The four solid aluminium legs are not vertical but set at a deliberate 42-degree angle to the NS-5000's baffle surface, a geometry determined through simulation to minimize the reflection of sound waves from the speaker back toward the listening position. The smooth curved surfaces of the legs further reduce diffraction and scattering of sound that would occur with flat or angular leg profiles. The stand height of 304mm with spikes installed was specified to align the NS-5000's tweeter precisely with the ear level of a seated listener, which simultaneously minimizes floor reflection interference at the listening position. This combination of leg angle, surface geometry, and height is specific to the NS-5000 and would not achieve the same acoustic result with any other loudspeaker.

Solid Aluminium Legs and Vibration Resistance

The four legs of the SPS-5000 are machined from solid aluminium, chosen for its combination of high structural rigidity, favorable vibration damping properties, and the ability to be formed with the smooth curved geometry that the acoustic simulation identified as optimal. The total mass of 8.0kg per unit gives the stand substantial vibration resistance, reducing the transmission of speaker cabinet energy into the stand and floor while simultaneously resisting floor-borne vibration from reaching the NS-5000's cabinet. Steel cut spike feet are included for coupling to carpeted surfaces, penetrating the pile to make rigid contact with the subfloor beneath. For hard floor installation, the spikes can be removed and the stand used on its rubber leg caps to prevent surface damage while maintaining stable, low-resonance contact.

Key Features

• Designed Exclusively for the Yamaha NS-5000: Developed using sophisticated simulation analysis specifically for the NS-5000, with leg angle, height, surface geometry, and mass all determined to support the NS-5000 without introducing any undesired acoustic contribution of its own.
• Solid Aluminium Legs at 42-Degree Angle: Four solid aluminium legs with smooth curved surfaces are installed at a precisely calculated 42-degree angle to the NS-5000's baffle, minimizing sound reflection from the legs back toward the listening position and reducing diffraction from the stand structure.
• 304mm Working Height with Spikes: Stand height is set to align the NS-5000's tweeter with the ear level of a typical seated listener, simultaneously minimizing floor reflection interference at the primary listening position.
• 8.0kg Mass per Unit: Total stand weight provides substantial vibration resistance, reducing both speaker cabinet energy transmission into the stand and floor-borne vibration transmission into the NS-5000 cabinet.
• Steel Cut Spike Feet: Included steel spikes couple the stand to the rigid subfloor through carpeted surfaces, eliminating the mechanical instability and resonance that carpet introduces between stand base and floor.
• Removable Spikes with Rubber Leg Caps: Spikes can be removed for installation on hard flooring surfaces, with rubber leg caps providing stable, non-marking contact without compromising stand stability.
• Height Adjustment Spacers: Included spacers allow fine height adjustment of the speaker position on the stand to eliminate any unsteadiness caused by minor floor irregularities.
• Speaker-Fixing Screws: Specialized screws are included to rigidly fix the NS-5000 cabinet to the SPS-5000 top plate, preventing any relative movement between speaker and stand that could introduce resonance or alter the speaker's acoustic coupling to the stand.

Technical Specifications

Frequently Asked Questions

What is the Yamaha SPS-5000?

The Yamaha SPS-5000 is a dedicated speaker stand engineered exclusively for the Yamaha NS-5000 loudspeaker, featuring solid aluminium legs set at 42 degrees to the baffle surface, a simulation-optimized 304mm working height with spikes, steel cut spike feet, height-adjustment spacers, and speaker-fixing screws, weighing 8.0kg per unit. It was developed through sophisticated acoustic simulation analysis to support the NS-5000 without introducing any undesired sound reflection, diffraction, or vibration artifact. The SPS-5000 is available at Vinyl Sound in Toronto, Canada.

Why are the SPS-5000 legs set at a 42-degree angle?

The 42-degree leg angle was determined through Yamaha's acoustic simulation analysis as the geometry that most effectively minimizes the reflection of sound waves from the NS-5000's baffle back toward the listening position. Vertical or conventionally angled legs create reflective surfaces that can redirect speaker output in unintended directions, adding time-delayed coloration to the direct sound. By angling the smooth curved aluminium legs at 42 degrees, the SPS-5000 deflects these reflections away from the primary listening axis, preserving the NS-5000's intended dispersion pattern and imaging precision.

Can the Yamaha SPS-5000 be used with speakers other than the NS-5000?

The Yamaha SPS-5000 was designed specifically for the NS-5000, with its leg geometry, height, top plate dimensions, and speaker-fixing screw positions all matched to the NS-5000's cabinet. While other bookshelf speakers of similar footprint could physically be placed on the stand, the acoustic simulation work that determined the 42-degree leg angle and 304mm height was performed exclusively in relation to the NS-5000's driver layout and cabinet geometry. Optimal performance is only guaranteed when the SPS-5000 is used as the matched system stand for the NS-5000.

How does the SPS-5000 differ from the SPS-3000 stand for the NS-3000?

The SPS-5000 and SPS-3000 are both dedicated system stands for their respective Yamaha NS speakers, but they differ substantially in design approach and construction. The SPS-5000 uses four solid aluminium legs at a simulation-determined 42-degree angle, prioritizing acoustic neutrality through leg geometry and diffraction reduction, with a lower 304mm working height matched to the NS-5000's driver placement. The SPS-3000 uses an MDF and rubber wood stand body with a 6mm steel top plate at a taller 648mm working height matched to the NS-3000's bookshelf cabinet proportions, prioritizing mass and rigidity at the speaker-to-stand interface. Each stand is the correct and only recommended base for its matched NS speaker model.

Do I need to fix the NS-5000 to the SPS-5000 with the included screws?

Yes, Yamaha includes specialized fixing screws with the SPS-5000 specifically to rigidly attach the NS-5000 cabinet to the stand's top plate. Fixing the speaker prevents any relative movement between cabinet and stand during playback, which would otherwise introduce micro-vibrations at the interface that can blur low-level spatial detail and tonal accuracy. The rigid speaker-to-stand connection also ensures that the full mass of the SPS-5000 contributes to the vibration resistance of the combined assembly rather than acting as a loosely coupled separate mass beneath the speaker.

Where can I buy the Yamaha SPS-5000 in Toronto or Canada?

The Yamaha SPS-5000 is available at Vinyl Sound, an authorized Yamaha dealer in Toronto, Canada. As the SPS-5000 is the system-matched stand for the NS-5000 loudspeaker, Vinyl Sound can assist with purchasing both components together and advise on room placement and system setup. Purchasing from an authorized Canadian dealer ensures full Yamaha manufacturer warranty coverage for both the stands and speakers.

Is the SPS-5000 sold individually or as a pair?

Based on the specification weight of 8.0kg per unit, the SPS-5000 is specified and sold as an individual stand unit. A stereo NS-5000 installation requires two SPS-5000 stands. Vinyl Sound can confirm current packaging, availability, and pricing for a matched pair when you inquire about the NS-5000 and SPS-5000 system.