Audio-Technica VM750SH Dual Moving Magnet Cartridge

Audio-Technica VM750SH Dual Moving Magnet Cartridge with Shibata Stylus

The Audio-Technica VM750SH is a flagship 700 Series moving magnet phono cartridge available at Vinyl Sound in Toronto, Canada. Equipped with a precision Nude Shibata stylus and Audio-Technica's renowned dual-magnet VM architecture, the VM750SH extracts ultra-high frequencies from your vinyl records with exceptional detail, low distortion, and reduced groove wear, making it one of the most technically accomplished MM cartridges available at its price point. Highly recommended by Positive Feedback and praised across the audiophile community, the VM750SH delivers analog playback with digital-like precision without sacrificing the warmth that makes vinyl special. Browse our full selection of phono cartridges at Vinyl Sound Toronto Canada.

VM Dual Magnet Technology and Shibata Stylus Performance

Unlike a conventional single-magnet design, the VM750SH positions two magnets to precisely align with the left and right stereo groove walls. This dual-magnet configuration results in outstanding channel separation (30 dB at 1 kHz) and extended frequency response up to 27,000 Hz. The Nude Shibata stylus, mounted on an aluminum tapered cantilever, makes far greater contact with the groove than an elliptical tip, reaching micro-groove detail that elliptical styli simply cannot track, while simultaneously reducing the stylus pressure on any given point of the groove wall.

Build Quality and Engineering

The VM750SH body is constructed from die-cast aluminum alloy, which damps unwanted resonance and provides a natural electromagnetic shield. Paratoroidal coils maximize generating efficiency, while a dedicated center shield plate between the left and right channels keeps crosstalk to a minimum. The result is a cartridge that is both sonically transparent and mechanically inert, qualities that matter at every stage of vinyl playback.

Key Features

• VM dual magnet design with independently aligned left/right channel magnets
• Nude Shibata stylus (2.7 x 0.26 mil) for ultra-high-frequency retrieval and reduced groove wear
• Aluminum tapered pipe cantilever for low mass and high rigidity
• Paratoroidal coils for improved generating efficiency
• Center shield plate reduces crosstalk between channels
• Die-cast aluminum alloy housing reduces vibration and adds natural electrical shielding
• Standard half-inch mount compatible with the vast majority of tonearms
• Replacement stylus: VMN50SH (user-swappable)
• Includes full mounting hardware kit and OFC lead wire set

Specifications

Frequently Asked Questions

What is a Shibata stylus and why does it matter for vinyl playback?

The Shibata stylus profile was originally developed for quadraphonic records and features an extremely narrow contact radius. It traces the groove more precisely than an elliptical stylus, retrieving ultra-high frequencies up to 27,000 Hz with lower distortion and reduced groove wear over time.

Is the Audio-Technica VM750SH compatible with my phono preamp?

Yes. The VM750SH is a standard moving magnet (MM) cartridge with a 4.0 mV output, which is compatible with any MM phono stage. Set your phono preamp to 47,000 ohms load impedance and aim for 100–200 pF capacitance for best results.

How does the VM750SH compare to the Ortofon 2M Black?

Both are high-end MM cartridges with line-contact or Shibata-type styli. The VM750SH uses a Nude Shibata tip with the dual-magnet VM system, offering notably strong channel separation at 30 dB. Choice between them often comes down to system synergy and personal preference; both are benchmark performers at their price level.

What tonearms is the Audio-Technica VM750SH compatible with?

The VM750SH uses a standard half-inch mount and is compatible with virtually all modern tonearms. Its dynamic compliance of 10 x 10⁻⁶ cm/dyne at 100 Hz pairs best with medium- to high-mass tonearms (10–20 g effective mass).

Can I replace the stylus on the VM750SH myself?

Yes. The replacement stylus is the VMN50SH, which clips onto the VM750SH cartridge body. Stylus replacement is a simple user procedure requiring no special tools; simply slide off the old stylus and snap the new one into place.

Is the VM750SH good for 45 RPM and 78 RPM records?

The VM750SH is optimized for standard 33⅓ and 45 RPM vinyl records. It is not suited for 78 RPM shellac records, which require a wider-groove 78 stylus. For 45 RPM singles, it performs excellently.

Does the VM750SH come with mounting hardware?

Yes. The VM750SH includes four cartridge installation screws (5 mm and 10 mm), two washers, two hexagon nuts, a non-magnetic screwdriver, a stylus brush, and an OFC lead wire set, everything needed for a complete installation.

Where to buy the Audio-Technica VM750SH in Toronto, Canada?

Vinyl Sound in Toronto, Canada is an authorized Audio-Technica dealer. You can purchase the VM750SH online with Canadian pricing or contact our Toronto store directly at (647) 977-1100 for availability and setup advice.