Klipsch IC-8T-SW-MR Mud Ring Kit for In-Ceiling Speaker at Vinyl Sound Toronto Canada

The IC-8T-SW-MR is a pre-construction mud ring kit from Klipsch (Indianapolis, USA), available at Vinyl Sound in Toronto, Canada. Designed specifically for use with the Klipsch IC-SW-8T2 in-ceiling subwoofer and IC-800-T 70-volt in-ceiling speaker, this accessory simplifies drywall ceiling installations in commercial and residential distributed audio projects. The bracket is constructed from zinc-plated 20-gauge steel, rated for use in plenum spaces, and is sold singly in individual cartons as part number 061347. It attaches to ceiling joists before drywall is installed, providing a precise cutout reference for the ceiling contractor and a secure mounting foundation for the loudspeaker.

Pre-Construction Design for Faster, More Accurate Installations

The IC-8T-SW-MR is a pre-construction bracket, meaning it is installed before drywall is hung rather than as a retrofit after the ceiling is finished. By attaching directly to the ceiling joists at rough-in stage, the mud ring defines the exact position and cutout diameter for the loudspeaker opening, eliminating guesswork during the drywall phase and reducing the risk of misaligned or oversized cutouts. This approach is particularly valuable on commercial projects where multiple ceiling subwoofer or speaker positions must be pre-coordinated with other ceiling trades. Once drywall is installed over the bracket, the loudspeaker drops into the opening and seats flush against the mud ring for a clean, professional finish with no visible gaps or light bleed around the baffle.

Plenum-Rated Zinc-Plated Steel Construction

The mud ring is fabricated from 20-gauge zinc-plated steel, providing the structural rigidity needed to hold the IC-SW-8T2 subwoofer or IC-800-T speaker securely in a drywall ceiling without flex or movement. The zinc plating provides corrosion resistance in the damp or variable-temperature conditions that can occur in plenum spaces above suspended ceilings. The plenum rating confirms that the bracket meets building code requirements for materials used in air-handling spaces, which is a mandatory compliance consideration in commercial, hospitality, retail, and institutional installations. Each kit is packaged individually for single-speaker installations and can be ordered in the quantities required to match the loudspeaker count on any project.

Key Features

• Compatible with IC-SW-8T2 and IC-800-T: Designed specifically for the Klipsch IC-SW-8T2 in-ceiling subwoofer and IC-800-T 70-volt in-ceiling speaker for a guaranteed fit and flush finish.
• Pre-Construction Bracket Design: Installs to ceiling joists before drywall is hung, defining the exact cutout location and providing a stable mounting frame from rough-in through final installation.
• Zinc-Plated 20-Gauge Steel: Heavy-duty steel construction with zinc plating for rigidity, durability, and corrosion resistance in ceiling void and plenum environments.
• Plenum Space Rated: Compliant for use in air-handling plenum spaces, meeting commercial building code requirements for materials installed above suspended or drywall ceilings.
• Simplifies Drywall Installations: Reduces installation time by providing a clear cutout reference for ceiling contractors, minimizing alignment errors and rework on multi-speaker commercial projects.
• Single Ring per Kit: Each kit includes one mud ring, allowing flexible ordering matched exactly to the number of speaker positions in the installation.
• Part Number 061347: Individually packaged in cartons for easy job-site inventory and single-unit ordering.

Technical Specifications

Frequently Asked Questions

What is the Klipsch IC-8T-SW-MR mud ring kit?

The Klipsch IC-8T-SW-MR is a pre-construction mud ring bracket made from zinc-plated 20-gauge steel, designed to simplify drywall ceiling installations of the Klipsch IC-SW-8T2 in-ceiling subwoofer and IC-800-T in-ceiling speaker. It attaches to ceiling joists before drywall is installed, defines the precise cutout location for the speaker opening, and provides a flush mounting frame for the loudspeaker once the ceiling is finished.

Which Klipsch speakers is the IC-8T-SW-MR compatible with?

The IC-8T-SW-MR mud ring kit is designed for use with the Klipsch IC-SW-8T2 in-ceiling subwoofer and the Klipsch IC-800-T 70-volt in-ceiling speaker. It is not intended for other Klipsch IC series models such as the IC-400-T, IC-500-T, or IC-525-T, which use a separate mud ring kit designed for their smaller cutout dimensions.

Can the IC-8T-SW-MR be used in plenum spaces?

Yes, the IC-8T-SW-MR is rated for use in plenum spaces. Its zinc-plated 20-gauge steel construction meets the material requirements for installation in air-handling ceiling voids, making it suitable for commercial, hospitality, retail, and institutional projects where building codes require plenum-compliant materials above the finished ceiling line.

When in the construction sequence should the mud ring be installed?

The IC-8T-SW-MR is a pre-construction bracket and should be installed to the ceiling joists before drywall sheets are hung. This is typically done during the rough-in stage alongside electrical and HVAC rough-in work. The bracket defines the cutout position for the ceiling contractor, who cuts through the drywall to the ring opening during finishing. The loudspeaker is then installed into the prepared opening at the final trim-out stage.

Where can I buy the Klipsch IC-8T-SW-MR in Toronto or Canada?

The Klipsch IC-8T-SW-MR mud ring kit is available at Vinyl Sound, an authorized Klipsch dealer in Toronto, Canada. Vinyl Sound carries the full Klipsch commercial and architectural in-ceiling speaker lineup, including the IC-SW-8T2 subwoofer and IC-800-T speaker that the mud ring is designed to support, and can assist with commercial project specifications and multi-unit ordering.

How many mud rings are included in each kit?

Each IC-8T-SW-MR kit contains one mud ring, packaged individually in its own carton. For installations involving multiple IC-SW-8T2 subwoofer or IC-800-T speaker positions, one kit must be ordered per speaker location. The individual carton packaging makes it straightforward to match mud ring quantities directly to the loudspeaker count on any commercial or residential project.

Is the IC-8T-SW-MR required for all IC-SW-8T2 installations?

The IC-8T-SW-MR mud ring is specifically intended for drywall ceiling installations and is not required for every installation type. The Klipsch IC-SW-8T2 in-ceiling subwoofer ships with a tile bridge accessory designed for suspended ceiling grid installations. The mud ring kit is the correct accessory when the ceiling substrate is drywall and the loudspeaker must be roughed in before sheetrock is applied.