Klipsch Flexus SURR 200 Wireless Dolby Atmos Surround Speakers (Pair) at Vinyl Sound Toronto Canada

The Flexus SURR 200 is a wireless Dolby Atmos surround speaker pair from Klipsch (Indianapolis, Indiana, USA), co-engineered with Onkyo and available at Vinyl Sound in Toronto, Canada. Designed as a wireless expansion component for the Klipsch Flexus soundbar ecosystem, the SURR 200 delivers a true multichannel Dolby Atmos surround field without speaker wire runs between units. Each speaker houses one 3-inch up-firing driver and one 3-inch front-firing full-range driver in a sealed enclosure powered by a built-in Class D amplifier, reaching a maximum acoustic output of 106 dB at 1 metre. Connection to a compatible Flexus Core soundbar is established via the included Flexus Transport USB-C wireless dongle operating on a proprietary 5 GHz low-latency link, eliminating the cables, junction boxes, and power adapters of conventional surround speaker installations. The Flexus SURR 200 pairs with the Flexus Core 100, Core 200, and Core 300 soundbars.

Dual-Driver Dolby Atmos Architecture: Up-Firing and Front-Firing Coverage

The SURR 200 achieves full Dolby Atmos height and surround coverage from a single compact enclosure through a two-driver configuration. The 3-inch up-firing paper cone driver radiates sound toward the ceiling, producing the overhead height channel effects that define the Dolby Atmos listening experience: rainfall, aircraft, and aerial sound objects that appear to originate from above the listener. The 3-inch front-firing paper cone driver handles the conventional rear surround channel, placing lateral sound effects and ambient field content at ear level behind the listening position. Both drivers operate as full-range units within a sealed plastic and metal enclosure, covering a frequency response from 235 Hz to 20 kHz, and both are powered by the speaker's internal amplifier from a single wall outlet connection. The result is a speaker that simultaneously fills the height and surround zones of a Dolby Atmos room geometry from one small, cable-free cabinet.

Flexus Transport Wireless Technology and Onkyo Engineering

The SURR 200 communicates with compatible Flexus Core soundbars via a proprietary Flexus Transport wireless protocol operating on the 5 GHz band for low-latency, interference-resistant audio transmission. The included USB-C dongle plugs into the USB-A port on the back of the Flexus Core soundbar and pre-pairs with the SURR 200 speakers out of the box, eliminating wireless configuration steps. Onkyo's electronics engineering team subjected the Flexus system to more than 1,000 rigorous stress tests covering wireless connectivity, amplifier stability, and long-term performance before the product was released, combining Onkyo's decades of AV manufacturing expertise with Klipsch's established acoustic heritage. Each SURR 200 speaker is independently powered by plugging directly into a wall outlet via the included detachable C7 2-prong power cord, with the power entry point located discreetly on the bottom panel of the cabinet to maintain a clean rear-panel appearance when wall mounted.

Placement Flexibility and Concealed Controls

The SURR 200 enclosure measures 8.75 inches tall by 4.13 inches wide by 4.31 inches deep, making it compact enough to sit on a shelf, bookcase, or furniture surface behind the listening position without visual intrusion. A rear-panel 1/4"-20 threaded insert allows standard wall-mount bracket installation for permanent side-wall or rear-wall positioning at the correct Dolby Atmos surround height. All operating controls, status LEDs, and the power entry point are located on the bottom of the cabinet rather than on the visible front or rear faces, eliminating indicator light glow in a darkened home theater room. The ebony vinyl finish integrates cleanly into contemporary room decor, and the absence of speaker wire between the two SURR 200 units means total placement freedom independent of wall outlet locations.

Key Features

• Dolby Atmos Enabled with Dual-Driver Array: One 3-inch up-firing driver and one 3-inch front-firing driver per speaker deliver simultaneous overhead height channel and rear surround channel coverage from a single compact enclosure, conforming to Dolby Atmos multichannel surround specifications.
• Flexus Transport Wireless Connectivity: Proprietary 5 GHz low-latency wireless link via included USB-C dongle connects the SURR 200 to compatible Flexus Core 100, Core 200, and Core 300 soundbars without speaker wire runs across the room.
• Built-In Class D Amplification: Each speaker contains its own dedicated amplifier powered directly from a wall outlet, achieving up to 106 dB maximum acoustic output at 1 metre as a pair without drawing amplifier channels from the connected soundbar or AV receiver.
• Independently Powered with No Adapters: Each speaker plugs directly into a standard wall outlet via the included detachable C7 2-prong power cord, with no junction boxes, dongles between speakers, or additional power adapters required.
• Concealed Controls and LEDs: All operating controls, status indicators, and power connections are recessed on the bottom panel of the cabinet, eliminating visible light glow and button clutter in a darkened home theater environment.
• Wall Mountable via 1/4"-20 Threaded Insert: Rear-panel threaded insert accepts standard wall-mount brackets for permanent side-wall or rear-wall installation at optimal Dolby Atmos surround height positions.
• Sealed Plastic and Metal Enclosure: Acoustic suspension design eliminates port noise and supports precise, clean reproduction of short-duration overhead and surround sound effects throughout the 235 Hz to 20 kHz frequency range.
• Powered by Onkyo Engineering: Co-developed with Onkyo and subjected to more than 1,000 engineering stress tests for wireless connectivity stability, amplifier reliability, and sustained acoustic performance.
• Klipsch Connect Plus App Compatible: System configuration, level adjustments, and firmware updates are managed via the Klipsch Connect Plus iOS and Android app for convenient wireless control.
• Ebony Vinyl Finish: Scratch-resistant ebony vinyl cabinet integrates discretely into contemporary room decor whether wall mounted or placed on a shelf surface.

Technical Specifications

What's in the Box

• Klipsch Flexus SURR 200 Wireless Surround Speakers (Pair)
• Flexus Transport USB-C wireless dongle
• Detachable C7 2-prong power cords (one per speaker, 6.5 inches)

Frequently Asked Questions

What is the Klipsch Flexus SURR 200?

The Klipsch Flexus SURR 200 is a wireless Dolby Atmos surround speaker pair from Klipsch, Indianapolis, Indiana, USA, co-engineered with Onkyo. Each speaker contains a 3-inch up-firing driver and a 3-inch front-firing full-range driver powered by a built-in 25-watt Class D amplifier, reaching a maximum combined output of 106 dB at 1 metre as a pair. The SURR 200 connects wirelessly to compatible Klipsch Flexus Core soundbars via a proprietary 5 GHz Flexus Transport USB-C dongle, adding true Dolby Atmos overhead and rear surround channels to the Flexus soundbar system without any speaker wire running between units or across the room floor.

How does the Klipsch Flexus SURR 200 compare to the Klipsch Flexus SURR 100?

The Flexus SURR 200 is the higher-tier wireless surround option in the Flexus ecosystem, distinguishing itself from the SURR 100 through the addition of a dedicated 3-inch up-firing driver per speaker alongside the standard front-firing driver. The SURR 100 provides rear surround channel coverage only, while the SURR 200 delivers both rear surround and Dolby Atmos overhead height channel content from the same enclosure. For listeners who want the full three-dimensional Dolby Atmos experience with height effects from the rear surround positions, the SURR 200 is the appropriate choice. Against competing wireless surround systems, the SURR 200 competes with the Sonos Era 100 used as a surround speaker and the Samsung SWA-9500S, but differentiates through its dedicated up-firing Atmos driver and proprietary low-latency 5 GHz Flexus Transport wireless link.

Which Klipsch Flexus soundbars are compatible with the SURR 200?

The Klipsch Flexus SURR 200 is compatible with the Klipsch Flexus Core 100, Core 200, and Core 300 soundbars. Connection is established through the included Flexus Transport USB-C wireless dongle, which plugs into the USB-A port on the rear of the soundbar. Only one pair of SURR 200 speakers can be connected to a single compatible soundbar at a time. The SURR 200 is not compatible with soundbars from other manufacturers or with Klipsch products outside the Flexus Core series.

Does the Klipsch Flexus SURR 200 require speaker wire between the two speakers?

No, the Klipsch Flexus SURR 200 requires no speaker wire between the two surround speakers or between the speakers and the soundbar. Each SURR 200 speaker is independently powered by plugging into a standard wall outlet via its own included detachable C7 power cord, and each speaker communicates with the soundbar wirelessly via the Flexus Transport USB-C dongle. The only physical connection each speaker requires is to a nearby wall outlet, giving complete freedom in choosing placement positions without regard to cable routing.

Where can I buy the Klipsch Flexus SURR 200 in Toronto or Canada?

The Klipsch Flexus SURR 200 Wireless Dolby Atmos Surround Speakers are available at Vinyl Sound, an authorized Klipsch dealer in Toronto, Canada. Vinyl Sound serves customers across the Greater Toronto Area and ships across Canada, with full Klipsch manufacturer warranty coverage and expert advice on building a complete Flexus home theater system. Purchasing from an authorized Canadian Klipsch dealer ensures genuine product, warranty validation, and access to Klipsch's certified service network.

Can the Klipsch Flexus SURR 200 be wall mounted?

Yes, the Klipsch Flexus SURR 200 supports wall mounting via a 1/4"-20 threaded insert on the rear panel of each speaker. The power cord entry point is located on the bottom of the cabinet rather than the rear, which keeps the cable path tidy when the speaker is mounted flush against a wall surface. Standard speaker wall brackets compatible with 1/4"-20 thread can be used for permanent installation at the correct Dolby Atmos rear-height surround position on side walls or rear walls.

How is the Klipsch Flexus SURR 200 set up and paired to a soundbar?

Setup involves three steps: plugging the included Flexus Transport USB-C dongle into the USB-A port on the rear of a compatible Flexus Core soundbar, plugging each SURR 200 speaker into a wall outlet using the included power cords, and pressing and holding the pairing button on the bottom of each speaker to initiate the wireless connection. The SURR 200 ships pre-paired with its dongle, so in most cases the speakers connect automatically once powered on with the dongle already inserted into the soundbar. Additional configuration and level adjustments are available through the Klipsch Connect Plus app on iOS and Android.

What app controls the Klipsch Flexus SURR 200?

The Klipsch Flexus SURR 200 is managed through the Klipsch Connect Plus app, available for iOS and Android. The app provides system configuration, surround channel level adjustments, equalizer settings with presets, and access to firmware updates for the speaker pair. The same app controls the full Flexus ecosystem including the Core soundbar and any Flexus Sub subwoofers in the system, giving a unified control interface for the entire home theater setup.